Main Services


FRP cooling tower

FRP Counter Flow & Cross flow cooling tower. In FRP counter flow cooling tower all structural support and post are Steel and fill portion may be used by PVC Fill pack block.

TYPES

DETAILS OF THE TYPES

COUNTER FLOW & CROSSFLOW

In a counterflow design the air flow is directly opposite to the water flow (see diagram below). Air flow first enters an open area beneath the fill media and is then drawn up vertically. The water is sprayed through pressurized nozzles and flows downward through the fill, opposite to the air flow.

Crossflow is a design in which the air flow is directed perpendicular to the water flow (see diagram below). Air flow enters one or more vertical faces of the cooling tower to meet the fill material. Water flows (perpendicular to the air) through the fill by gravity. The air continues through the fill and thus past the water flow into an open plenum area. A distribution or hot water basin consisting of a deep pan with holes or nozzles in the bottom is utilized in a crossflow tower. Gravity distributes the water through the nozzles uniformly across the fill material.

Counter-flow type cooling tower having a rectangular casing body. In the cooling tower, a filling for heat exchanging or a closed type heat exchanging unit is supported.

A sprinkler type water spraying device with a plurality of sprinkler pipes is supported above the filling for heat exchanging or the closed type heat exchanging unit to spray the water on it.

A fan is placed above the water spraying device and in the air discharging port formed in the casing body.

The water spraying device is rotatably held by a vertical hollow shaft through which the water is fed.

The heat exchanging unit placed in the rectangular-shaped casing body. In this cooling tower, although the water is sufficiently sprayed onto the portion of the filling or the closed type heat exchanging unit in the central area of the rectangular-shaped casing, the cooling water does not reach the corner portions of the rectangular cooling body, whereby no water is supplied to the portion of the filling or the heat exchanging unit at the corner portions

USED MATARIELS

Type - Both Cross and Counter flow
Fan Cylinder - FRP
Fan Assembly - Epoxy based FRP multi bladed fan assembly. Light and durable, low vibration, easy maintenance
End wall Casing & Louver - FRP Construction.
Stair Case - FRP Construction with tubular hand railings.
Motor - Reputed make TEFC, weatherproof, IP - 55 Enclosure 415V / 3PH / 50Hz. / 1440 RPM.
Gear Box - Spiral Bevel type Gear.
Drive Shaft - Tubular type single span drive shaft fitted with flexible coupling with bushes.

Structural frame:
Side casing and louvers: F.R.P MADE PANEL.
Fan Deck: F.R.P MADE.
Eliminators: Marine Phenol Bonded Plywood and treated Pine-Wood.
Filling Material:
Hot Water Basin :
Motors: Standard Branded Motors of reputed makes
Fan Assembly: Cast Aluminium bladed with CI Hub.
Drive Shaft: Rod or Pipe Galvanized or Stainless Steel.
Flow Regulating Valves: CI body valves with operating shaft (Stem) of stainless steel.

PRODUCT RANGE

AS PER YOUR ORDER WE CAN SUPLY 10 to 1000 TR FRP COOLING TOWER


ROUND SHAPE COOLING TOWER

Round shaped or popularly known as bottle type are used by all Industries to cool their re-cycled process water, flow from 10M3/Hr. to 500 M3/Hr.

COUNTER FLOW

In a counterflow design the air flow is directly opposite to the water flow (see diagram below). Air flow first enters an open area beneath the fill media and is then drawn up vertically. The water is sprayed through pressurized nozzles and flows downward through the fill, opposite to the air flow.

Counter-flow type cooling tower having a rectangular casing body.

In the cooling tower, a filling for heat exchanging or a closed type heat exchanging unit is supported.

A sprinkler type water spraying device with a plurality of sprinkler pipes is supported above the filling for heat exchanging or the closed type heat exchanging unit to spray the water on it.

A fan is placed above the water spraying device and in the air discharging port formed in the casing body.

The water spraying device is rotatably held by a vertical hollow shaft through which the water is fed.

The heat exchanging unit placed in the rectangular-shaped casing body. In this cooling tower, although the water is sufficiently sprayed onto the portion of the filling or the closed type heat exchanging unit in the central area of the rectangular-shaped casing, the cooling water does not reach the corner portions of the rectangular cooling body, whereby no water is supplied to the portion of the filling or the heat exchanging unit at the corner portions

USED MATARIELS

Type - Both Cross and Counter flow
Fan Cylinder - FRP Construction / FRP (Optional)
Fan Assembly - Epoxy based FRP multi bladed fan assembly. Light and durable, low vibration, Easy maintenance
End wall Casing & Louver - FRP Construction.
Stair Case - FRP Construction with tubular hand railings.
Motor - Reputed make TEFC, weatherproof, IP - 55 Enclosure 415V / 3PH / 50Hz. / 1440 RPM.
Gear Box - Spiral Bevel type Gear.
Drive Shaft - Tubular type single span drive shaft fitted with flexible coupling with bushes

PRODUCT RANGE

AS PER YOUR ORDER WE CAN SUPLY 10 to 1000 TR FRP COOLING TOWER